RHV / oVirt / OLVM Monitoring

Skip Prerequisites, Web and LPAR2RRD tabs in case of configuring Virtual Appliance, Docker or a Container

Follow installation procedure for your operating system platform

Install LPAR2RRD server

  • Download the latest LPAR2RRD server
    Upgrade your already running LPAR2RRD instance.

  • Install it:
    # su - lpar2rrd
    $ tar xvf lpar2rrd-7.XX.tar
    $ cd lpar2rrd-7.XX
    $ ./install.sh
    $ cd /home/lpar2rrd/lpar2rrd
    
  • Make sure all Perl modules are in place
    cd /home/lpar2rrd/lpar2rrd
    . etc/lpar2rrd.cfg; $PERL bin/perl_modules_check.pl
    
    If there is missing "LWP::Protocol::https" then check this docu to fix it

  • Enable Apache authorisation
    su - lpar2rrd
    umask 022
    cd /home/lpar2rrd/lpar2rrd
    cp html/.htaccess www
    cp html/.htaccess lpar2rrd-cgi
    
  • Schedule to run it from lpar2rrd crontab (it might already exist there)
    $ crontab -l | grep load.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # LPAR2RRD UI
    0,30 * * * * /home/lpar2rrd/lpar2rrd/load.sh > /home/lpar2rrd/lpar2rrd/load.out 2>&1 
    
    Assure there is just one such entry in crontab.

  • You might need to add lpar2rrd user into /var/adm/cron/cron.allow (/etc/cron.allow on CentOS 8) if crontab command fails
    Allow it for lpar2rrd user as root user.
    # echo "lpar2rrd" >> /var/adm/cron/cron.allow
    
  • Assure you have a cron jobs for oVirt in place (upgrade script might do it automatically)
    Skip it on the Virtual Appliance, it is already there.
    $ crontab -l | grep "load_ovirt.sh"
    $
    
    Add it if it does not exist like above
    $ crontab -e
    
    # oVirt/RHV support
    0,20,40 * * * *  /home/lpar2rrd/lpar2rrd/load_ovirt.sh > /home/lpar2rrd/lpar2rrd/load_ovirt.out 2>&1 
    
  • Initial start from cmd line:
    $ cd /home/lpar2rrd/lpar2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/lpar2rrd/
    Use Ctrl-F5 to refresh the web browser cache.

Troubleshooting

  • If you have any problems with the UI then check:
    (note that the path to Apache logs might be different, search apache logs in /var)
    tail /var/log/httpd/error_log             # Apache error log
    tail /var/log/httpd/access_log            # Apache access log
    tail /var/tmp/lpar2rrd-realt-error.log    # STOR2RRD CGI-BIN log
    tail /var/tmp/systemd-private*/tmp/lpar2rrd-realt-error.log # STOR2RRD CGI-BIN log when Linux has enabled private temp
    
  • Test of CGI-BIN setup
    umask 022
    cd /home/lpar2rrd/lpar2rrd/
    cp bin/test-healthcheck-cgi.sh lpar2rrd-cgi/
    
    go to the web browser: http://<your web server>/lpar2rrd/test.html
    You should see your Apache, LPAR2RRD, and Operating System variables, if not, then check Apache logs for connected errors

OS agent is add-on feature for monitoring from operating system level.
It is monitoring CPU, memory utilization, paging, LAN and SAN traffic on all adapters.
It requires the OS agent deployment to every monitored VM or KVM host.
The agent is written in Perl and calls basic OS commands to obtain required statistics like vmstat, iostat.

OS agent architecture

Additional information about the OS agent:

Prerequisites

  • Perl
  • Opened TCP communication between each VM and LPAR2RRD server on port 8162.
    Connections are initiated from VM side.
  • Additional disk space on LPAR2RRD server (about 40MB per each monitored VM)
  • Create preferable dedicated user lpar2rrd on each VM with minimum rights
    # useradd -c "LPAR2RRD agent user" -m lpar2rrd
    

OS agent installation (client)

  • Get the latest OS agent from download page

  • Linux installation under root
    # rpm -Uvh lpar2rrd-agent-6.00-0.noarch.rpm
    # rpm -qa|grep lpar2rrd-agent
      lpar2rrd-agent-6.00-0
    
  • Linux Debian
    # apt-get install lpar2rrd-agent_6.00-0_all.deb
      lpar2rrd-agent-6.00-0
    
  • Solaris x86 installation under root:
    # gunzip lpar2rrd-agent-6.00-0.solaris-i86pc.tar.gz
    # tar xf lpar2rrd-agent-6.00-0.solaris-i86pc.tar
    # pkgadd -d .
      The following packages are available:
      1  lpar2rrd-agent     LPAR2RRD OS agent 6.00
                            (i86pc) 6.00
     ...
    
    Solaris upgrade under root:
    # pkgrm lpar2rrd-agent
    # pkgadd -d .
    
  • Schedule its run every minute from the crontab on every VM.
    This line must be placed into lpar2rrd crontab:
    # su - lpar2rrd
    $ crontab -e 
    * * * * * /usr/bin/perl /opt/lpar2rrd-agent/lpar2rrd-agent.pl <LPAR2RRD-SERVER> > /var/tmp/lpar2rrd-agent.out 2>&1
    
    Replace <LPAR2RRD-SERVER> by hostname of your LPAR2RRD server.

  • You might need to add lpar2rrd user into /var/adm/cron/cron.allow under root user if above "crontab -e" fails.
    # echo "lpar2rrd" >> /var/adm/cron/cron.allow
    

LPAR2RRD server (daemon)

  • Edit etc/lpar2rrd.cfg and set following (if it is not already set):
    $ vi /home/lpar2rrd/lpar2rrd/etc/lpar2rrd.cfg
    
    LPAR2RRD_AGENT_DAEMON=1
    
  • The daemon is started when load.sh starts
    $ ./load.sh
      Starting LPAR2RRD daemon on port:8162
      ...
    
  • Assure it is running and listening on port 8162:
    $ ps -ef|grep lpar2rrd-daemon
      lpar2rrd 10617010 1 0 Mar 16 - 0:00 /usr/bin/perl -w /home/lpar2rrd/lpar2rrd/bin/lpar2rrd-daemon.pl
    $ netstat -an| grep 8162
      tcp4  0  0  *.8162   *.*   LISTEN
    
  • OS agent data graphs will appear in the UI, use Ctrl-F5 to refresh your web browser

Troubleshooting

  • Client (agent) side:
    • Test if communication through the LAN is allowed.
      $ telnet  <LPAR2RRD-SERVER> 8162
        Connected to 192.168.1.1   .
        Escape character is '^]'.
      
      This is ok, exit either Ctrl-C or ^].

    • Check following agent files:
      data store: /var/tmp/lpar2rrd-agent-*.txt
      error log: /var/tmp/lpar2rrd-agent-*.err
      output log: /var/tmp/lpar2rrd-agent.out

    • run the agent from cmd line:
      $ /usr/bin/perl /opt/lpar2rrd-agent/lpar2rrd-agent.pl -d <LPAR2RRD-SERVER>
        ...
        Agent send     : yes : forced by -d 
        Agent send slp: sending wait: 4
        OS agent working for server: <LPAR2RRD-SERVER>
        store file for sending is /var/tmp/lpar2rrd-agent-<LPAR2RRD-SERVER>-lpar2rrd.txt
      
      It means that data has been sent to the server, all is fine
      Here is example when the agent is not able to sent data :
      $ /usr/bin/perl /opt/lpar2rrd-agent/lpar2rrd-agent.pl -d <LPAR2RRD-SERVER>
        ...
        Agent send     : yes : forced by -d 
        Agent send slp: sending wait: 1
        OS agent working for server: <LPAR2RRD-SERVER>
        store file for sending is /var/tmp/lpar2rrd-agent-<LPAR2RRD-SERVER>-lpar2rrd.txt
        Agent timed out after : 50 seconds /opt/lpar2rrd-agent/lpar2rrd-agent.pl:265
      
      It means that the agent could not contact the server.
      Check communication, port, above telnet example, DNS resolution of the server etc.

  • Server side:
    • test if the daemon on LPAR2RRD server is running, and checking the logs
      $ ps -ef|grep lpar2rrd-daemon
        lpar2rrd 10617010 1 0 Mar 16 - 0:00 /usr/bin/perl -w /home/lpar2rrd/lpar2rrd/bin/lpar2rrd-daemon.pl
      $ cd /home/lpar2rrd/lpar2rrd
      $ tail logs/error.log-daemon
      $ tail logs/daemon.out
        new server has been found and registered: Linux (lpar=linuxhost01)
        mkdir : /lpar2rrd/data/Linux/no_hmc/linuxhost01/
      
      It means that new OS agent has been registered from linuxhost01 (Linux stand-alone example)

    • Test if OS agent data is being stored on the LPAR2RRD server and have actual timestamp:
      $ cd /home/lpar2rrd/lpar2rrd
      $ ls -l data/<server name>/*/<VM name>/*mmm
        -rw-r--r-- 2 lpar2rrd staff  7193736 Mar 17 16:16 data/<server name>/no_hmc/<VM name>/cpu.mmm
        -rw-r--r-- 2 lpar2rrd staff  7193736 Mar 17 16:16 data/<server name>/no_hmc/<VM name>/lan-en1.mmm
        -rw-r--r-- 2 lpar2rrd staff 10790264 Mar 17 16:16 data/<server name>/no_hmc/<VM name>/mem.mmm
        -rw-r--r-- 2 lpar2rrd staff  7193736 Mar 17 16:16 data/<server name>/no_hmc/<VM name>/pgs.mmm
        -rw-r--r-- 2 lpar2rrd staff  7193736 Mar 17 16:16 data/<server name>/no_hmc/<VM name>/san-vscsi0.mmm
        -rw-r--r-- 2 lpar2rrd staff  3597208 Mar 17 16:16 data/<server name>/no_hmc/<VM name>/san_resp-vscsi0.mmm
      $ find data -name mem.mmm -exec ls -l {} \;
        ...
      
  • In case of a problem check our forum or contact us via support@lpar2rrd.com.
    We would need this data for start of troubleshooting.

Notes

    You will not need to upgrade LPAR2RRD agents regularly with each LPAR2RRD upgrade.
    Read release notes if that is necessary.
    Check OS agent upgrade steps.

oVirt-RHV monitoring schema

Implementation is agent less.
Data source is ovirt_engine_history database which is part of Data Warehouse on oVirt/RHV Virtualization Manager.
Tool accesses the ovirt_engine_history database remotely via its SQL API.
ovirt_engine_history database contains only historical performance data. There is only the admin account which we use.

OS Prerequisites

  • Open network connection to the RedHat Virtualization Manager on port 5432
    $ perl /home/lpar2rrd/lpar2rrd/bin/conntest.pl <Virtualization Manager/IP> 5432
      Connection to "<Virtualization Manager hostname/IP>" on port "80" is ok
    
  • Make sure you have installed perl modules: perl-DBI and perl-DBD-Pg on LPAR2RRD server
    $ rpm -q perl-DBI perl-DBD-Pg
      perl-DBI-1.627-4.el7.x86_64
      perl-DBD-Pg-2.19.3-4.el7.x86_64
    
    Install them if they are missing under root user
    • Linux RedHat, CentOS
      # yum install perl-DBD-Pg
      
    • Linux Debian, Ubuntu
      # apt-get install libdbd-pg-perl
      
    • AIX

Database access

    Each Virtualization Manager has its own randomly generated password for ovirt_engine_history database.
    To get the database password, you have to connect to your RHV / oVirt engine via SSH and run this command:
    # grep DWH_DB_PASSWORD /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-database.conf
    
    DB username should be ovirt_engine_history by default, check it with this command:
    # grep DWH_DB_USER /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-database.conf
      ovirt_engine_history
    

Attach oVirt / RHV

  • All is configured from the UI.
    XEN configuration
     
    XEN configuration

  • Assure you have a cron jobs for oVirt in place (upgrade script might do it automatically)
    Skip it on the Virtual Appliance, it is already there.
    $ crontab -l | grep "load_ovirt.sh"
    $
    
    Add it if it does not exist like above
    $ crontab -e
    
    # oVirt/RHV support
    0,20,40 * * * *  /home/lpar2rrd/lpar2rrd/load_ovirt.sh > /home/lpar2rrd/lpar2rrd/load_ovirt.out 2>&1
    
  • Wait 30 minutes and then go to the web UI: http://<your web server>/lpar2rrd/
    Use Ctrl-F5 to refresh the web browser cache.